Pro-series 51088 51 Receiver User Manual download pdf

Installation Instructions

Hyundai Santa Fe

Part Numbers:

51088

Hitch Shown In Proper Position

Equipment Required:

Wrenches: 14mm, 17mm, 19mm

Drill Bits: None

1. Remove vehicle tie down brackets and return with fasteners to vehicle owner.

2. Lower spare tire and vehicle exhaust.

3. Install fasteners as shown above.

4. Reinstall spare tire and vehicle exhaust.

Tighten all M12 CL 10.9 fasteners with torque wrench to 68 Lb.-Ft., 92 N*M

Rev. A10-9-0751088NSheet 1 of 3

z 2007 Cequent Towing Products

1/2” Conical washerQty. (1)M10 X 1.25 X 40mm CL 8.8 hex boltQty. (7)

3/8” Conical washerQty. (7)M12 X 1.25 X 40mm CL 10.9 Hex boltQty. (1)

Tighten all M10 CL 8.8 fasteners with torque wrench to 38 Lb.-Ft., 52 N*M

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Fastener Kit: 51088F

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

315 lb, 143 kg3500 lb, 1589 kg

Weight Carrying

Ball Mount

N/AN/A

Weight Distributing

Max Tongue

Max Gross

Trailer WT

Hitch type

Wiring Access Location: SUV3, SUV4

Form: F205 Rev A 5-6-05

Fascia

Frame Rail

Frame rail

Existing weldnuts

1 2 3

Summary of Contents

Page 1 - Installation Instructions

Installation InstructionsHyundai Santa FePart Numbers:51088Hitch Shown In Proper PositionEquipment Required:Wrenches: 14mm, 17mm, 19mmDrill Bits: None

Page 2 - Instructions d’installation

Instructions d’installationHyundai Santa FeNuméros de pièces :51088Attelage montré dans la position appropriéeÉquipement requis :Clés : 14 mm, 17 mm,

Page 3 - Instrucciones de instalación

Instrucciones de instalaciónHyundai Santa FeNúmeros de partes:51088El enganche se muestra en la posición correctaEquipo necesario:Llaves: 14mm, 17mm,