Pro-series 51138 51 Receiver User Manual download pdf

Installation Instructions

Dodge Dakota

Part Numbers:

51138

Hitch Shown In Proper Position

Equipment Required: Tape

Wrenches: 1-1/8”, 22mm

Drill Bits: None

1. Remove the lower bolts from the frame mounting brackets, (2) per side. Bolts will be use for hitch installation. Do not discard.

2. Attach flat washers with tape to the underside of the bumper (see Figure 2).

3. Insert bumper bracket mounting structure between flat washers (installed in Step 2) and bumper.

4. Swivel hitch into position and loosely reinstall fasteners removed in Step 1 with additional flat washers.

5. Install bumper bracket mounting structure fasteners as shown above.

6. Tighten all fasteners to the required torque specifications

Tighten all ¾-10 GR5 fasteners with a torque wrench to 260 Lb.-Ft. (353 N*M)

Tighten all M14 CL8.8 fasteners with a torque wrench to 89 Lb.-Ft. (121 N*M)

Rev. A8-11-0951138NSheet 1 of 3

z 2009 Cequent Performance Products

Flat Washer ½”Qty. (8)

Flat Washer ¾”Qty. (6)

Lock Nut ¾-10 (w/Nylon Insert)Qty. (1)

Hex Bolt ¾-10 x 2.75 GR5Qty. (1)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to prevent

entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working beneath a

vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and

SAE J684.

Fastener Kit: 51138F

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

500 (227 Kg.)5000 (2270 Kg.)

Weight Carrying

Ball Mount

800 (363 Kg.)8000 (3632 Kg.)

Weight Distributing

Max Tongue

WT (LB)

Max Gross

Trailer WT (LB)

Hitch type

Wiring Access Location: PU1, PU2

Form: F205 Rev A 5-6-05

Bumper

Frame Rail

Frame Mounting Brackets

Existing Weldnuts

Bumper

Bumper Bracket

Mounting Structure

Existing fasteners

Removed in Step 1

Reinstalled with

Additional washers

In Step 4.

Fasteners Typical

Both Sides

Bumper

Figure 2

Note: Additional flat washer

(provided) may be inserted

For more clearance.

Figure 1

Qty. 5 or 6

1 2 3

Summary of Contents

Page 1 - Both Sides

Installation InstructionsDodge DakotaPart Numbers:51138Hitch Shown In Proper PositionEquipment Required: TapeWrenches: 1-1/8”, 22mmDrill Bits: None1.

Page 2 - Visserie similaire

Instructions d’installationDodge DakotaNuméro de pièce :51138Attelage montré dans la position appropriéeÉquipement requis : RubanClés : 1-1/8”, 22 mmM

Page 3 - Tornillos iguales

Instrucciones de instalaciónDodge DakotaNúmeros de partes:51138El enganche se muestra en la posición correctaEquipo necesario: TapeLlaves : 1-1/8”, 22

Comments to this Manuals

No comments

Pro-series 51138 51 Receiver User Manual

Browse online or download User Manual for For the car Pro-series 51138 51 Receiver. Pro Series 51138 51 Receiver User Manual [en]

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Pro-series 51138 51 Receiver