Pro-series 51033 51 Receiver User Manual download pdf

Installation Instructions

Ford Explorer

Part Numbers:

51033

44100

Equipment Required:

Wrenches: 3/4, 15/16, 15mm, 18mm & 21mm

Drill Bits: None

Rev. A6-27-06N44100Sheet 1 of 1

z 2002, 2006 Cequent Towing Products

Hex Nut 1/2-13Qty. (2)

Hex Nut 5/8-11Qty. (2)

Conical Washer 1/2Qty. (2)

Lock Washer 5/8Qty. (2)

BlockQty. (2)

Flat Washer 5/8Qty. (2)

Carriage Bolt 1/2-13 X 2.00Qty. (2)

Hex Bolt 5/8-11 X 2.00Qty. (2)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Fastener Kit: F44100

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

500 (227 Kg)5000 (2270 Kg)

Weight Carrying

Ball Mount

600 (272 Kg)6000 (2724 Kg)

Weight Distributing

Max Tongue

WT (LB)

Max Gross

Trailer WT (LB)

Hitch type

Wiring Access Location: SUV1, SUV2

PRE-1997

1. Hold hitch up to the frame and align 5/8” holes in the side of the frame. Using the 1/2” holes in the flange mark the frame and drill 1/2”

holes.

2. Install 5/8” bolt, flat washer, lock washer, and nut in forward holes. Install 1/2” bolt through bolt plate and insert through the frame

and install 1/2” conical washer and nut.

3. Torque 5/8” nuts to 100 LB-FT. (136 N*M).

Torque 1/2” nuts to 75 LB-FT. (102 N*M).

1997-CURRENT

NOTE: Sport versions will need to remove the tow hook to install the hitch.

1. Hold hitch up to the frame and install 5/8” bolt, flat washer, lock washer, and nut in forward holes in the side of the frame. Install 1/2”

bolt through bolt plate and insert through the frame and install 1/2” conical washer and nut. See diagram on the other side.

2. Torque 5/8” nuts to 100 LB-FT. (136 N*M).

Torque 1/2” nuts to 75 LB-FT. (102 N*M).

SERIES 51®

Form: F205 Rev A 5-6-05

Installation Instructions 1

Summary of Contents

Page 1 - Installation Instructions

Installation InstructionsFord ExplorerPart Numbers:5103344100Equipment Required:Wrenches: 3/4, 15/16, 15mm, 18mm & 21mmDrill Bits: None1Rev. A6-27

Comments to this Manuals

No comments

Pro-series 51033 51 Receiver User Manual

Browse online or download User Manual for For the car Pro-series 51033 51 Receiver. Pro Series 51033 51 Receiver User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Pro-series 51033 51 Receiver